Mirage Accessory Items

      

MIRAGE ACCESSORY ITEMS
"For a complete system"
DEBUBBLIZER ITEM # DEBUB1OZ

ITEM # DEBUB16OZ

Mirage Debubblizer is a specially formulated surface tension breaker which allows Mirage Investment to flow smoothly and bubble free.  The Debubblizer interacts with Mirage Duplicating material allowing consistently accurate dies.

This material is very helpful when used to moisten HydroColloid or other impressions, wax bites, and denture flaskings.  Every detail in these impressions can be easily and accurately duplicated without air bubbles using Mirage Debubblizer.


PORCELAIN STIFFENER ITEM # PORSTIFF1OZ

ITEM # PORSTIFF16OZ

Porcelain Stiffener should be added directly to porcelain before building the restoration to give the porcelain a stiffer working consistency.

The putty like consistency makes the porcelain easier to handle because the porcelain will stay exactly where it is placed.  The increased control of the porcelain will allow for greater predictability of the final Mirage restoration.  The increased stiffness will also decrease the shrinkage of the porcelain on the refractory die.


MIRAGE CONDENSER LIQUID ITEM # PORCOND16OZ

ITEM # PORCONGAL

The advantages of using Mirage Condenser Liquid are many.  It aids substantially in the building of porcelain by allowing it to fully conform to the intricacies of the model. The Condenser Liquid formula incorporates a wetting agent which allows the model to more fully saturate the model.  Soaking time is reduced from the conventional 5 to 10 minutes to less than 1 minute.  Steam tears, lifting and porcelain discoloration are eliminated.


GLASS BEADS ITEM # GLASSBEADS

Glass Beads are extra fine Micron spherical beads that are used to remove investment.  WILL NOT harm, chip or abrade porcelain and does not affect glaze.  Size  10lbs


RESTORATION BOXES ITEM # RBBW

Containers for shipment of restorations.  Quantity:  Box of 50, Box of 100


SUPER ETCH ITEM # SEK

Mirage Super Etch is formulated to etch surfaces of Mirage porcelain restorations: crowns, inlays, onlays, bridges and veneers.  The material facilitates a microscopic etch of the porcelain surfaces to enhance bonding.  These microporosities will, when engaged by the resin cement, create a micromechanical bond which is unsurpassed in the marketplace.


FREKOTE LIFFT ITEM # FREKOTE

Frekote can be used as a separator on the Mirage Trays.  It will ease removal of the yellow stone from the blue Mirage tray as well as assisting with the removal of the investment model.

Frekote Lifft is a non-silicone based releasing agent specifically designed for use in injection/compression rubber, rotational plastic and urethane elastomers.  Frekote Lifft is non/flammable, fast drying, easy to clean and extremely versatile.


SOFT TRAYS

"The carrier"

ITEM # SOFTTRAY

Manufactured from a Ceramic/Fiberglass material designed to protect Mirage restorations during any firing.  Soft Trays facilitate heat dissipation when firing "low fusing" add-on porcelain which reduces the potential for warping. The Soft Tray conducts minimal heat and is easily removed by hand after firing.


VEST-IT

"Instant Investment"

ITEM # VESTIT

Vest-It is a non-sticky, non-asbestos, high heat (2300 F) refractory investment material that can be used to create custom trays/ work holders, to make instant repair investments and to serve as a heat shield insulator:  Vest-It is premixed and ready to use.  Size:  Syringe 10 gm


DIE TRAYS ITEM # MTCLEAR

ITEM # MTB (BLUE)

This tray technique enables the technician to produce individual master models and refractory dies.  The walls have been tapered for ease of removal and to hold the models securely.  The floor has been thinned to simplify removal for duplications purpose.  They hold masters models securely in place with retention clips.  This tray allows for separation and ditching of the master model.  Packaging:  12 pkg  Box of 100


DUPLICATING TRAYS ITEM # DISPF/DISPANT/DISPQ

Designed with rear distal walls allowing you to take an impression using only 30 cc impression material.  Full Arch, Anterior Tray, Quadrant (Right or Left)


WOVEN FLEX TRAYS ITEM # FLEXTRAY

This firing tray combines the features of rigid hard trays and soft liners.  You will love the flexibility, durability and multi uses of this tray.  Size:  2.5" x 2.5" Square

Back to Laboratory Product Index