Fortress Miscellaneous
DEBUBBLIZER ITEM # FPDEBUB

"Bubble Free"

Fortress Debubblizer is a specially formulated surface tension reducer that allows ALL investments to flow smoothly and bubble free.  The Debubblizer works with duplicating material allowing consistently accurate dies.  This material is very helpful when used to moisten Hydro-Colloid or other impressions, wax bites, and denture flaskings.  Every detail in these impressions can be easily and accurately duplicated without air bubbles using Debubblizer.


Size:  1 oz  or  16 oz


PORCELAIN STIFFENER  ITEM # PORSTIFF

"Makes porcelain stiff"

Porcelain Stiffener should be added directly to porcelain before building the restoration to give the porcelain a stiffer working consistency.  The putty like consistency makes the porcelain easier to handle because the porcelain will stay exactly where it is placed.  The increased control of the porcelain will allow for greater predictability of the final restoration.  Note:  Porcelain becomes chalk like after drying, making porcelain not reusable.


Size:  1 oz, 16 oz  or  Gallon


GLASS BEADS ITEM # GLASSBEADS

Extra fine Micron spherical beads used to remove investment.  Will NOT harm, chip or abrade porcelain and does not affect glaze.

Size:  10 lbs


MIRAGE PENCIL ITEM # PENCIL

A ceramic material to mark margins of refractory material, which will not burn out.


RESTORATION BOXES ITEM # FPRBR

Containers for shipment of restorations.  Quantity:  Box of 50, Box of 100


FREKOTE LIFFT ITEM # FREKOTE

"Separator"

Frekote Lifft can be used as a separation medium with the Fortress Trays.  It will aid in the removal of the stone from the tray as well as assisting with the removal of the investment model.  Frekote Liffts is a non-silicone based releasing agent.  Frekote is nonflammable, fast drying, easy to clean and extremely versatile.


Size:  9.5 oz


FORTRESS MODEL SOAKING LIQUID  ITEM # FPMSL

The advantages of using Fortress Model Soaking Liquid are many.  It aids substantially in the building of porcelain by allowing it to fully conform to the intricacies of the model.  The Model Soaking Liquid formula incorporates a wetting agent that allows full saturation of the refractory model. 

Size:  8 oz, 16 oz  or  Gallon

*The refractory model MUST be soaked before porcelain is applied for proper building results.


SUPER ETCH ITEM # SEK

"90 second etch"

Super Etch is formulated to etch all porcelains, crowns, inlays, onlays and veneers.  A quick 90-second etch, with no white haze.  This material creates a microscopic pitting of the porcelain surface.  These micro-porosities will engage the resin cement, creating a micro-mechanical bond, which is unsurpassed in the marketplace.

Size:  1 oz


SOFT TRAYS ITEM # SOFTTRAY
"The carrier"

Manufactured from a ceramic/fiberglass material designed to carry restorations during any firing.  This creates a custom holder for restorations.  Soft Trays allow heat to dissipate evenly.  Can be used before or after divesting to prevent the porcelain from adhering to surfaces.

Package:  1 in pkg.


VEST-IT ITEM # VESTIT

"Instant Investment"

Vest-It is a non-sticky, non-asbestos, high heat (2300F) refractory investment material that can be used to create custom trays/work holders, to make instant repair investments and to serve as a heat shield insulator.  Vest-It is premixed and ready to use!

Syringe:  10 gm


BRUSH SAVER

ITEM # BRUSHSAVER

Used to extend the life of you expensive porcelain building brush.  Makes it look new.


DUPLICATING TRAYS ITEM # DISPF/DISPANT/DISPQ

Designed with rear distal walls allowing you to take an impression using only 30 cc impression material.  Full Arch, Anterior Tray, Quadrant (Right or Left)


WOVEN FLEX TRAYS ITEM # FLEXTRAY

This firing tray combines the features of rigid hard trays and soft liners.  You will love the flexibility, durability and multi uses of this tray.

Size:  2.5" x 2.5" Square

Back to Laboratory Product Index